In the construction industry, if you can't make sure that every part of the structure is aligned correctly, you may face some serious problems in the future.
The pipe laser is a very practical tool that can be used in many different ways on the construction site.
Some contractors believe that the pipe laser is one of the most versatile tools that can be used not only for pipes.
As long as you have a basic understanding of how to set up the laser, you can use it to help with any number of projects.
Most often, pipe lasers are used to install drains and other gravity flow drains.
The gravity flow pipe must have a precise, constant downward slope.
The laser provides a line that specifies the speed at which the drop is maintained.
A smooth descent from one manhole cover to the next one helps prevent blocked pipes and expensive backups, and still allows the fluid in the pipe to flow and discharge naturally.
The first step in using a pipe laser is to set it up.
You have to have some way to make sure it's level.
You can level the laser off with a lead hammer, or if you have an auto-flat laser, press the auto-flat button.
The simplest to use is the self-leveling laser.
Be sure to measure the distance between the incoming and outgoing openings of the pipe to be aligned.
You must also measure the elevation of two points in order to determine the rate at which the pipe must be tilted.
You can determine this rate by dividing the elevation difference from point A to Point B by the number and dividing by the distance between point A and point B.
This is the algebra you never thought you would use after high school;
The rate of decline is like rising. over-
Run, but in this case it's autumn-over-run.
Once you have a fall rate, you can use the plus or minus button to adjust the laser of the pipe to increase or decrease the tilt of the laser.
More advanced lasers are able to find the drop rate with the help of special target plates.
You put the target on the other end of the pipe.
When the laser points to the target, it automatically looks for the center.
This makes it easier to use a pipe laser.
These automatic lasers make it much more efficient to properly lay sewage pipes, almost foolproof.
Once you understand how the pipe lasers work, it's easy to use them.