dr diy; big brother winner & building expert's easy guide. - best laser measuring tool

How about Craig Phillips. .
It is important to install the dado track, when you install the dado orpicture track, you have to make your level perfect, otherwise you may encounter tracks that do not meet the requirements.
Intelligent measuring tool for tools and materials/laser level 18v bit drive drill bit including countersunk bit pencil safety specification Dado track plug and screw 1.
First decide the height of the track you want, then measure the height of all four corners with your laser.
Before cutting, you can also use the smart measurement side of the laser to distinguish the length of the track.
Top tip: the use of intelligent measuring tools with laser can guarantee the best accuracy, especially in more difficult places around doors and windows. 2.
Mark the area on the wall and put the track in place.
Install your first piece by drilling a hole in the Wood track.
Change the drill bit to a masonry drill bit and drill the dado track into the wall.
Then insert the right plug.
For example, you need a plasterboard plug if you have a plasterboard wall.
Top tip: before fixing the track to the wall, sink your ironing board so that the screws can sink into it and the holes can be filled and polished later. 3.
Put the screwdriver in the drill bit and drive the screw in place to keep the position of the first guide rail.
Once this is fixed on the wall and repeated on the other three walls, your last piece should be perfectly aligned with your first one.
Top tip: For professional finishes, create 45-with chop saw or mitre block-
The angle of degree on the corner of the track.
If you choose to planing the wood rail, you can paint, dye or paint it.
It is easy to do so before fixing the railway to the wall. www. craigphillips. co. uk CAPTION(S)
: Carefully check the height using the laser measuring tool, drill all the power tools provided by Ryobi PowerTools into the wallryobitools. co.