buy digital measuring tape How to Make Block Ice for My Cooler

If you want to keep the items in the refrigerator colder for a long time, fill the refrigerator with ice instead of ice.Because of the density of the ice, it will not melt as fast as the ice.You can buy ice cubes at stores such as grocery stores, convenience stores, or fishing stores, but it's much more cost-effective to make your own ice cubes at home.
Measure the approximate size inside the refrigerator with a tape measure.The purpose of this step is to check how big a pot of water will be in your refrigerator.For example, you can install a rectangular pot in an 18 cubic feet size refrigerator/freezer that is at least 17 inch long, 15 inch wide and 9 inch high.
If you have a top, stand-Freezing alone, this step is not very relevant as you have more space to make ice cubes.Check the dimensions of the cooler to make sure the ice is right.If you have not yet owned a pot of this size, buy a metal or plastic pot of the right size.
You can use a metal cake plate or--If your refrigerator and cooler are big enough-Plastic dishwashing pan.Clean the pan with soap and water before use.Fill the pot with water so it is about 90% full and put on the counter or table next to the fridge.
Water expands when it freezes, so you need to leave some space on the top of the pan.Put the pot in the refrigerator.Do it slowly in order not to overflow any water.Make sure the pot sits on a flat surface.Wait for ice to form for at least 12 hours.
This time will vary depending on the model and temperature of your refrigerator and the size of the ice cubes you are making.When the water is completely turned into ice, take the pot out of the fridge.There should be no water flowing in the pan.
Beat the pan inside your cooler and break the ice on the pan.You may need to do this several times before the ice falls into the bottom of the cooler