Press or slide locking switch to turn laser tool ON; short press to turn laser tool OFF when the laser tool is locked with the pendulum.
◪- Is enabled when the laser tool is switched to the unlocked position.
◪- Has laser beam(s) blink fast at 2 Hz when the tool is out of self-leveling range.
◪- Allows proper use of tool’s full-time pulse mode with laser detector.
◪- Is enabled when the pendulum lock is in its locked position to position the laser tool at various angles to project non-level straight lines.
◪- Disables self-levelling operations; Accuracy of the beam(s) is not guaranteed to be level, and the laser beam(s) will blink about every 5 seconds
You can use 1V1H Portable Self Leveling MSR/G20Hmini Cross Line Laser for any job that requires a long straight line or a long straight level line etc. I often use mine when tiling. Imagine you want to install a suspended ceiling in a large building, it would be very difficult using a spirit level, but with a laser you can just set it up once and it will shine the laser beam around the room giving you a perfectly level line to work to.
Slide the slider at the below of the tool to deactivate self-levelling, you can use it at any angle that is not level until flashing of every five (5) seconds stop.
Fits both the laser tool and the mounting arm, good for storing and carrying; It also can keep the dust off. With an adjustable mounting clamp base
Easy-to-adjust mounting base, for the versatility of use in a variety of applications.
APP Umeasure---the must-have home decorating apps for iOS And Android which can connect with Mobile and Laser Distance Meter